Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Portsmouth?
Spring replacement in Portsmouth typically costs $180 – $340 for a single spring, and most doors have two springs that are replaced together, so a matched pair usually runs about twice that. The price covers the springs, the labor, and balancing the door afterward. The written estimate you get before work begins sets the final price.
Torsion springs are the part that does the heavy lifting on a garage door, and they’re under constant tension. When one lets go, the door either won’t lift or drops hard. It’s the most common garage door failure we see in Portsmouth and also the one that carries the most risk, which is why it’s a service we handle as its own dedicated category rather than a side note on a repair list.
We work on the door you have, whatever brand it is. Our technicians are factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, so the answer to a broken spring is rarely “replace the whole door.” Our technicians have up to 15 years of experience, and estimates are free. Call (855) 937-1767 when the door won’t move and you want a straight answer on what it takes to fix it.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down across the Portsmouth market. These are typical estimated ranges, not a quote. The written estimate is what you’ll actually pay.
| Line Item | Typical Estimated Range |
|---|---|
| Single spring replacement | $180 – $340 |
| Matched pair (two springs, the usual job) | About double the single-spring range, since a pair is replaced together |
| Spring repair vs. replacement (partial fix) | $180 – $340 |
| Cable repair (often done alongside spring work) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair (if the opener was damaged when the spring failed) | $120 – $320 |
| Panel replacement (if a spring failure bent a section) | $250 – $500 |
| Full garage door repair job, spring included | $150 – $600 |
| New door installation (if the door is beyond repair) | $700 – $2,200 |
What pushes a spring job toward the top of the range? Heavier doors, a larger door opening, a spring that took a cable or drum with it, and panels that bent when the door dropped. What keeps it near the bottom: a standard single spring on a single-car door with nothing else affected. If the opener got strained fighting a door with a dead spring, that’s a separate line. We quote those separately so the number stays honest.
A cable that’s frayed or off its drum can’t wait, and neither can a spring that’s clearly broken. If the door is stuck open or stuck closed, our emergency service gets a technician moving quickly. When the door won’t move, we move fast.
What Affects Spring Replacement Pricing in Portsmouth
- Door weight and size. A wider, heavier double-car door needs stronger springs, which cost more than the springs on a standard single-car door. That’s most of the reason one job lands near $180 and another near $340.
- One spring or two. Many doors run a single spring and some run a matched pair. A pair is usually replaced together as a set because mixing a new spring with a worn one just wears out the new one faster, so the pair is roughly double the single-spring cost.
- Whether a cable goes with it. When a torsion spring lets go it can unwind fast enough to whip a cable or spin a drum. That turns a spring job into a spring-plus-cable job, and cable work runs $130 – $250 on its own.
- What the failure bent on the way down. A door that drops when the spring breaks can bend a track, pop a roller, or crease a panel. Those are separate repairs: track work at $120 – $240, rollers at $110 – $220, and a panel at $250 – $500.
- Opener strain. A door run for a stretch with a broken spring drags on the opener. If the safety reverse feature or the motor took a hit, opener repair runs $120 – $320 on top of the spring.
- Access and condition of the door. Tight clearances, a door close to the ceiling, and general wear on an older door all add labor time. So does a door that hasn’t been serviced in years, where the springs are the first thing but not the only thing that needs attention.
Location in Portsmouth affects response and scheduling far more than price. Across neighborhoods, spring pricing is fairly consistent because the parts and labor don’t change much from block to block. What matters is getting it done right, in the right order, by someone equipped to do the work.
Why Spring Failure Is the Job You Don’t Want to DIY
Torsion springs hold the full weight of the garage door and store a lot of energy. When one fails, it releases that energy in a fraction of a second, and when you try to remove or wind a wound spring without the right tools, it can let go at the worst moment. People get badly hurt this way. We’re not going to walk you through winding one. What we will tell you is what to look for: a visible gap in the spring coil, a door that feels bottom-heavy or won’t lift at all, and a door that’s crooked going up. Those point to a spring problem, and the next step is a trained technician, not a wrench.
Spring work is a service we handle as a dedicated category because it’s the most hazardous and the most common garage door repair. If you need the broader picture of the service, spring replacement covers what’s involved. And if a spring failure has stressed your opener, we work on the two main smart-home-compatible lines, LiftMaster and Chamberlain, as well as legacy Craftsman and Genie systems. Your system, our specialty.
How to Save on Spring Replacement
The biggest savings come from fixing the spring before it takes other parts down with it. Here’s how to keep the bill at the low end.
- Act on the first sign. A door that feels heavy or opens crooked is telling you a spring is failing. Catch it before it snaps and you avoid damage to cables, tracks, and panels that would add hundreds to the job.
- Replace the pair, not the single. It sounds like more, but replacing one spring on a two-spring door usually means the second one fails soon after, and you pay labor twice. Doing both at once is the cheaper path over time.
- Get a free estimate first. We’ll tell you what’s actually broken and what it costs before anything is touched. No surprises at the end. Call (855) 937-1767.
- Don’t replace the door for a spring. If someone pitches a whole new door when you’ve got a failed spring and a sound door, get a second opinion. We work on the door you have and only recommend replacement when the door is truly past it.
- Ask about the opener. If the opener was strained by a dead spring, check it now. A small opener repair at $120 – $320 beats letting it burn out and paying for full opener installation at $250 – $550 later.
- Bundle related repairs. If rollers or a track are worn too, doing them during the same visit saves a second trip. Rollers at $110 – $220 and realignment at $120 – $240 are cheaper done together than separately.
Can You Fix a Broken Spring the Same Day?
Yes, in most cases. Spring replacement is a routine job, and for a standard door our technicians can usually diagnose and replace a broken spring in a single visit. When the door is stuck open, stuck closed, or has dropped and bent something, our emergency service is the call. When the door won’t move, we move fast. Fast dispatch is available, and if the timing is tight, we’ll tell you straight when we can get there so you’re not waiting without an answer.
If you’re not sure whether it’s a spring, a cable, or the opener, call (855) 937-1767 and describe what the door is doing. We’ll help you sort it out and set up a free estimate.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Portsmouth?
Spring replacement in Portsmouth typically costs $180 – $340 for a single spring, and a matched pair is about double that. Most doors have two springs, so budget for the pair. Call (855) 937-1767 for an exact quote; estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing or replacing the spring is almost always cheaper than replacing the door, and by a wide margin: spring work runs $180 – $340 per spring, while a new door installation runs $700 – $2,200. Replace the door only when it’s structurally beyond repair. Call (855) 937-1767 and we’ll tell you which one you’re looking at.
Why does a two-spring door cost about double a one-spring door?
Because both springs are usually replaced together as a matched set, so the part and labor cost is roughly twice a single spring. Replacing one spring on a two-spring door often means the second fails soon after, and you pay labor twice. For a firm number, call (855) 937-1767.
Does a broken spring damage the opener or the door?
It can. A door run with a dead spring drags on the opener, and a door that drops can bend a track, pop a roller, or crease a panel. Those add costs: opener repair at $120 – $320, track realignment at $120 – $240, rollers at $110 – $220, and a panel at $250 – $500. Catching the spring early avoids most of this; call (855) 937-1767 for a free estimate.
Can you come today if my door is stuck?
Often, yes. Our emergency service is a real offering, not a vague promise, and spring failures are a common same-day job. When the door won’t move, we move fast. Call (855) 937-1767 and we’ll tell you when we can get there, free estimate included.
Do you work on my brand of door and opener?
We’re factory-familiar with eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means we diagnose and repair the system you already have instead of defaulting to replacement. Call (855) 937-1767 and we’ll confirm what your door needs.
What If the Door Needs More Than a Spring?
Springs are the most common failure, but they’re rarely the only thing a door needs once it’s been run with a broken one. A door that dropped may need a track straightened or a panel swapped. An opener that fought a dead spring may need repair. Because we cover the full range of garage door and opener work, from a minor opener fix through full installation, you don’t have to line up a second company once the spring is done. From opener glitch to full installation, it’s all one call.
For the full picture of what we handle, see Portsmouth Garage Door Repair Pros.
Here’s the short version: a spring replacement in Portsmouth runs $180 – $340 per spring, the pair usually gets replaced together, and the written estimate sets the final price. If your door is stuck, bottom-heavy, or making a bang you can’t explain, don’t force it. Call (855) 937-1767 for a free estimate. We’ll tell you what’s broken and what it takes to fix it.
Pricing reflects the Portsmouth market as of 2026. Portsmouth Garage Door Repair Pros offers free estimates – call (855) 937-1767.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Arjun Singh"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Kristen Barrett"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Bethany Mercer