Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Portsmouth Homeowners
A broken spring is the most common reason a garage door suddenly stops moving, and it’s the one repair you shouldn’t put off or attempt on your own. In Portsmouth, a torsion or extension spring that snaps typically leaves the door locked in place or hanging heavy and dangerous, so the fix needs to happen fast. Our technicians have up to 15 years of experience with the springs and hardware that fail most often on the doors people actually own here, from older extension-spring setups in Churchland and Cradock to newer torsion systems in Churchland and the neighborhoods off Airline Boulevard. Spring replacement is a named service for us, not an afterthought. We offer same-day spring repair across Portsmouth when you call early, and because we work on the brand you already have, you won’t get a replacement pitch when a new spring will do. We quote the price before any work starts, so you know the number up front. Call (855) 937-1767 and we’ll get a technician out to make the door safe and working again.
What Our Garage Door Spring Repair Service Includes
Every spring job is different, so we start by identifying what’s actually failed and what the door needs to operate safely. Here’s what falls under our spring repair work in Portsmouth.
Torsion Spring Replacement
The torsion spring is the coiled spring mounted on the shaft above your door, and it does the heavy lifting every time the door opens. When it breaks, the door becomes extremely heavy and the opener can burn out trying to lift it. We replace torsion springs sized to your door’s weight, and because torsion springs are under constant high tension, we handle the winding and unwinding ourselves rather than leaving it to a homeowner. This is not a repair to attempt without training and the right winding bars. Our technicians use winding bars, winding cones, and a spring gauge to set the correct turns for your door.

Extension Spring Replacement
Extension springs run along the top tracks on either side of the door and stretch as the door closes. They’re common on older Portsmouth homes, and they tend to fail without much warning. We replace them in matched pairs so both sides pull evenly and the door stays level. We also recommend and install safety cables through the center of each spring to contain it if it ever breaks.

Broken Spring Repair
A broken spring usually announces itself with a loud bang and a door that won’t budge. On torsion systems, you can often see a gap in the coil; on extension systems, the spring may be stretched out and dangling. We confirm which spring failed, check the other for wear, and replace what’s needed so the door operates smoothly again. A matched pair is usually the smarter move, since the second spring is often close to failing when the first goes.

Spring Adjustment
Sometimes the spring isn’t broken, just out of balance, which makes the door feel heavy, slam down, or stop partway. We check the door’s balance and adjust spring tension so it lifts and lowers evenly and your opener isn’t working overtime. Correct adjustment also protects the opener from premature wear. We measure balance with the opener disconnected before touching the springs.
Safety Cable Installation
Safety cables run through the middle of extension springs and are the difference between a controlled failure and a spring flying across the garage. Many older doors were built without them. We install cables on any extension-spring door that lacks them. It’s a small job with real safety value, especially in a garage where people and cars come and go all day.
Spring Inspection
A spring can be worn and near failure long before it snaps, and a visual inspection catches the warning signs early. We look for gaps in torsion coils, stretched extension springs, rust, and uneven door travel that points to a tired spring. If you hear a creak, a snap, or the door feels heavier than it used to, an inspection is worth the call. Catching a spring before it fails keeps the door usable and avoids a surprise.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on the door you have, not just the brands we’d rather sell. That means we’re set up to diagnose and repair springs and hardware on the systems that are actually installed in Portsmouth garages. If you have a LiftMaster opener running a torsion door, we know how that system wears and where the stress lands. If your door came with a Chamberlain or Genie opener, the same applies. And when the door itself is a Clopay, Amarr, Wayne Dalton, or Raynor, we service those too, along with Craftsman equipment. Our technicians have up to 15 years of experience across these brands, so a spring replacement doesn’t turn into a “you need a whole new door” conversation.
What that brand familiarity means for you is simple: we diagnose the spring and hardware correctly the first time and repair what’s broken. We don’t push a replacement when a repair is the right call. So whether you have a Raynor door, a Genie opener, or any other make, we can help. If you’re not sure what brand you have, tell us what the door looks like and we’ll take it from there.
Signs You Need Garage Door Spring Repair Right Now
Some spring problems are obvious; others build slowly. Here’s what to watch for before a small issue becomes an emergency.
- A loud bang from the garage. A snapping torsion or extension spring often sounds like a gunshot. If you heard it and the door won’t open, the spring has likely broken and the door is now dangerously heavy, so don’t force it.
- The door won’t lift, or lifts only a few inches. When the opener runs but the door barely moves, the spring has stopped doing its job. Running the opener against a dead spring can burn out the motor, so stop and call.
- A visible gap or stretch in the spring. On torsion springs, a clean gap in the coil means it’s broken. On extension springs, a spring that looks stretched and slack has lost its tension. Either way, the door isn’t safe to use until it’s replaced.
- The door feels unusually heavy or slams shut. A door that’s hard to lift by hand or drops fast when lowered points to lost spring tension. This one is easy to miss because the opener masks it, but it shortens the opener’s life and puts stress on the door.
- Uneven movement or a door that stops halfway. When one spring is weaker than the other, the door can bind or tilt. That uneven travel strains tracks and rollers. It’s a sign the springs need adjustment or replacement before more damage adds up.
Our Garage Door Spring Repair Process – Step by Step
Spring work is the highest-risk repair on any garage door, so we follow the same careful sequence on every Portsmouth job.
- 1
Safety check and door assessment. We start by making sure the door is secure and won’t drop, then check the door’s weight, balance, and travel. This tells us whether we’re dealing with a single broken spring or a system that’s out of balance.
- 2
Identify the spring type and size. Torsion and extension springs are sized to the door’s weight, so we match the replacement to your door rather than grabbing whatever’s on hand. Getting the size right is what keeps the door balanced and the opener from overworking.
- 3
Replace the spring (or pair). We remove the failed spring and install the new one, replacing both when they’re a matched pair. For torsion springs we wind them to the correct number of turns using proper winding bars. For extension springs we fit matched sets with safety cables.
- 4
Balance and test the door. With the opener disconnected, we lift and lower the door by hand to confirm it holds position and moves evenly. Then we reconnect the opener and run the door through several full cycles to check the travel limits and safety reverse.
- 5
Final walkthrough and cleanup. We check the tracks, rollers, and hinges while we’re there, clear away old hardware, and walk you through what we replaced and what to watch for. If we spot something else worth fixing, we tell you before doing anything.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Portsmouth?
Garage door spring repair in Portsmouth typically runs $180 – $340 for one spring, and a matched pair usually costs about twice that range because both springs are replaced together. A torsion spring replacement in Portsmouth lands in that range depending on the door’s size and the spring’s size. A broken extension spring repair falls in the same ballpark, with safety cables adding a small amount if your door doesn’t have them. Spring adjustment, when nothing is broken and the door just needs rebalancing, is often toward the lower end. Here’s a quick look at the numbers you can expect:
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Matched pair (both springs) | About twice the single-spring range |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
What moves the price up or down is mostly door weight, spring type, and whether both springs need replacing. A heavy two-car door uses larger springs than a single-car door, and a door that’s been run on a dead spring may need opener attention too. To avoid overpaying, get a written estimate before work starts and ask whether the quote covers one spring or a pair. Our free estimate spells out exactly what’s included, and the written estimate sets the final price. Call (855) 937-1767 for an exact quote – estimates are free.
Garage Door Spring Repair Near Portsmouth – Our Service Area
We handle spring repair in Portsmouth and the surrounding communities, including Norfolk, Chesapeake, Suffolk, Hampton, Newport News, Virginia Beach, Carrollton, Smithfield, Benns Church, Bethel Manor, and Poquoson. When a spring fails, call us early and we’ll do our best to get a technician out the same day in and around Portsmouth. If you’re outside the immediate area, ask about timing when you call and we’ll give you a straight answer. You can also read more about our Portsmouth Garage Door Repair Pros services, or check our garage door spring repair and garage door spring repair pages for nearby coverage.
Serving Portsmouth, VA – Our Local Coverage Area
We serve Portsmouth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Portsmouth
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. The springs do most of the lifting, so when one breaks or loses tension, the door becomes heavy and unsafe. We replace the broken spring, match it to your door’s weight, and test the door’s balance before we leave. We often replace both springs at once when they’re a matched pair, since the second one is usually close to failing too.
Most single-spring replacements take about an hour, and a matched pair takes a bit longer. If the door also needs cables, rollers, or opener adjustments, add time for that. We give you a realistic window when you call. Because spring size and door weight vary, timing depends on the job – call (855) 937-1767 and we’ll tell you what to expect.
Spring repair typically runs $180 – $340 for one spring, and a matched pair usually costs about twice that. What you pay depends on door weight, spring type, and whether both springs are replaced. We give a written estimate before any work starts, and that estimate sets the final price. Call (855) 937-1767 for an exact quote – estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Spring repair is mostly about the door and hardware, but we also check that your opener handles the door smoothly after the fix. If your opener is strained from a dead spring, we’ll tell you. Call (855) 937-1767 with your brand and model and we’ll get you booked.
Yes, emergency garage door service is a core part of what we do. If a spring breaks and leaves the door stuck open, stuck closed, or structurally compromised, call us and we’ll do our best to get out the same day. We work on spring failures because a door that can’t close means your garage isn’t secure. Call (855) 937-1767 and we’ll move as fast as we can.
Warranty terms depend on the parts and the work, so we’ll confirm the details with you before we start. We don’t quote a warranty we can’t stand behind. What we can promise is a written estimate before work begins and a test of the door’s balance after the repair. Ask us about warranty coverage when you call (855) 937-1767.
Clear the area under and around the garage door and leave a path to the springs. Don’t try to open or force the door once a spring has broken; that risks injury and further damage. If you can, note whether the door is stuck open or closed so we can plan the right tools. Then call (855) 937-1767 and we’ll take it from there.
Schedule Your Garage Door Spring Repair Service in Portsmouth Today
A broken spring leaves your door heavy, unsafe, and stuck – don’t wait for it to get worse. Our technicians have up to 15 years of experience, we work on the brand you already have, and we quote the price before any work starts. Same-day spring repair is available across Portsmouth when you call early. Get a free, no-obligation estimate and a clear plan to make your door safe and working again. Call (855) 937-1767 today.
Written by the team at Portsmouth Garage Door Repair Pros.